.

 

 

 

 

 

Kingfisher International

Application Notes for Fiber Testing

  1. Decibel dBm Definition

  2. Loss measuring concepts

  3. System margin & Bit Error Rate

  4. Modal distribution

  5. Connector characteristics

  6. ORL & Back Reflection Guide

  7. Transmission system overview

  8. Some Fiberoptic Emitter characteristics

  9. Optoelectric Detector characteristics

  10. Practical Measurement Procedures

    1. Absolute Power Measurement

    2. Measuring Loss

    3. Single Direction Loss

    4. Single-direction Loop-back Loss Using a Source & Meter, or One LTS

    5. Bi-directional Attenuation Using Two Sources & Meters, or Two Simple LTS

    6. Bi-directional Loss & ORL Measurement Using a Pair of Two-way LTS

    7. Coupled Power Ratio Measurement Procedure

    8. KI734x Series ORL Meter Verification Procedure

  11. Locating faults

  12. Talk sets

  13. Practical Quality Control for Fiberoptic Measurements

  14. Improving attenuation measurement accuracy

  15. When to use an OTDR or LTS

  16. A Fusion Splicer Primer

  17. How to choose between a Source & Meter, LTS, or Two-Way Instrument

  18. Which loss Measurement wavelengths do I need?

  19. How to chose an optical detector

     
     
     
     
 

Asia Pacific Technology
15055 SW Sequoia Pkwy 120 Portland , Oregon 97224
Phone: 503.403.4200
Fax: 503.403.4205
Email: sales@asiapt.co